Feature

• XFP MSA Rev 4.5 Compliant
• Data rate from 9.95Gbps to 11.095Gbps
• Reference Clock Options
• Cooled 1550 nm EML and APD receiver
• link length up to 120km (with EDFA)
• 2400ps/nm Dispersion Tolerance for 120km Single mode fiber
• +1.8V,+3.3V,+5V Supply Voltage
• Low Power Dissipation 3.5W Maximum
• XFI and lineside loopback Mode Supported
• -5ºC to 70ºC Operating Case Temperature
• Diagnostic Performance Monitoring of module temperature, Supply Voltages, laser bias current, transmit optical power, and receive optical power
• RoHS6 compliant (lead free)

Application

• 10GBASE-ZR/ZW 10G Ethernet
• 10G Fibre Channel
• SONET OC-192 / SDH STM-64
• OTN OTU2e

Description

XFP Transceiver is designed for 10G SDH/SONET and 10G Fibre Channel applications. The transmitter section incorporates a cooled EML laser, and the receiver section consists of a APD photodiode integrated with a TIA, Integrated low power dual CDR with Electronic Dispersion Compensation (EDC). The EDC for 10Gb/s 1550nm Links Project initiates the standardization of optical links that benefit from the technical and economic advantages of EDC, extending the reach of present 10Gb/s 1600ps/nm (80km) technology to 2400ps/nm (120km). This module can be used to compensate channel impairments caused by either single mode fiber up to 120 km with EDFA .All modules satisfy class I laser safety requirements. XFP transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.

Mechanical Specification

Ordering Information